Cómo limpiar un Nail Gun Jam
Las pistolas de clavos de hoy en día cuentan con grandes mejoras en peso, estilo, agarre y confiabilidad. Suponiendo que haya seleccionado la presión, el par y el clavo correctos para su proyecto, los atascos de la pistola de clavos no deberían ocurrir muy a menudo. Cuando se produce un atasco de clavos, tiene que despejar el clavo atascado de la pistola de clavos antes de continuar con su proyecto. Este artículo te ayudará a hacerlo de manera segura.
Desconecte la pistola de clavos del compresor de aire. Nunca intente despejar un atasco con la pistola de clavos todavía unida al compresor.
Abra la puerta de limpieza de la pistola de clavos. La puerta de limpieza de atascos se encuentra en la punta de la pistola de clavos y le brinda fácil acceso a la trayectoria de las uñas. La mayoría de las pistolas tienen una palanca presionada para liberar la puerta de limpieza de atascos.
Quite la uña atascada con los dedos o un alicate de punta fina si está atascada.
Cierre la puerta de limpieza de atascos y asegúrese de que esté bien ajustada. Conecte la pistola de clavos de nuevo al compresor de aire y estará listo para continuar su proyecto.
Cosas que necesitarás
- Pinzas de punta de aguja
Advertencias
- Use gafas de seguridad cuando use una pistola de clavos.
- Nunca coloque su cara directamente detrás de una pistola de clavos cuando dispare.
- Nunca cargue la pistola de clavos con el gatillo comprimido.
- Tenga en cuenta la colocación de sus dedos antes de disparar su pistola de clavos.
FAQ - 💬
❓ How do you clear a jam in a nail gun?
👉 0:251:19How to Deal with a Nail Jam on a Finish Nailer or Brad Nailer ToolYouTubeStart of suggested clipEnd of suggested clipRight in the center. Right before our front door is where these Brad nails will get jammed up youMoreRight in the center. Right before our front door is where these Brad nails will get jammed up you need to take a screwdriver and pry those out once the nails have been cleared.
❓ How do you fix a stuck nail gun?
👉 How to unjam a nail gun:
- Unscrew the two front nose bolts, or lift the nose latch, releasing the front nose plate.
- Open the nose.
- Clear the jam and push the driver blade back to its rest position.
- Close the front nose and refix it.
- Ensure the work contact element is free.
- Reinsert the battery and the fuel cell.
❓ Why does my nail gun keep jamming?
👉 What Caused the Jam: Lack of Adequate Oil: The air cylinder in the nose needs plenty of oil to function properly. Too little oil, and the nails will be slow to feed, causing a jam. Pro Tip: For coil nailers, use 10-15 drops of oil before nailing.
❓ How do you fix a nail gun that won't fire?
👉 My Nailer Won't Fire – Troubleshooting Common Causes of Jams and Misfires
- Clear Jams. ...
- Inspect Your Air Supply. ...
- Reload the Magazine. ...
- Clean the Tool. ...
- Replace Seals and O-Rings. ...
- Inspect for Damage. ...
- Take It to the Service Center.
❓ How do you unjam a framing nailer?
👉 0:273:25How to clear a nail jam in the Paslode PowerVent Framing Nailer
❓ What kind of oil do you use in a nail gun?
👉 What kind of oil should I use? Only use lubricating oil made specifically for pneumatic tools, such as Senco Pneumatic Tool Oil or Paslode Lubricating Oil. Other oils lack the correct viscosity or contain ingredients that can destroy the seals, disintegrate O-rings, or may even cause combustion.
❓ How do you lubricate a nail gun?
👉 0:301:30Best Way To Oil Your Nail Gun or Air Tool
❓ What kind of oil do you use for a nail gun?
👉 Only use lubricating oil made specifically for pneumatic tools, such as Senco Pneumatic Tool Oil or Paslode Lubricating Oil. Other oils lack the correct viscosity or contain ingredients that can destroy the seals, disintegrate O-rings, or may even cause combustion.
❓ How long do nail guns last?
👉 A battery for a cordless tool will last approximately 3 years or 1,000 charge cycles. For gas-powered nailers, expect to pay about $13 to $15 for a single fuel cell. While fuel cell life can differ depending upon size and application of the tool, most deliver 1,000 to 1,300 shots.
❓ What can go wrong with a nail gun?
👉 All nail guns have the potential to cause serious injury. Using a nail gun with a bump or automatic trigger (also known as contact trip trigger) can result in unintended nail discharge. Other risks include lack of training, working fast and keeping the trigger squeezed when not nailing.
❓ How do you clean a jam in a Dewalt nail gun?
👉 0:291:29How To UnJam a Dewalt Framing Nailgun